Premier Control Technologies Flow, pressure, level and temperature solutions
Original Equipment Manufacturers (OEM's) and System Integrators often require tailor-made solutions that meet their tight constraints on cost whilst also fulfilling essential on-time delivery and consistent quality. In more simple terms there is an industry need for high volume / low price products and Premier Control Technologies (PCT) are highly experienced within this field.
PCT have an extensive range of existing OEM solutions available across a wide range of technologies that accommodate many industries and sectors. Generally, instruments are fully configurable to the OEM's own applications, space-envelope, labelling or wiring requirements.
The whole engineering team at PCT are totally customer-centric and have many years of experience with our products across multiple sectors and are ready to talk to engineering or research and development teams about OEM solutions.
We aim to improve the quality and accelerate the delivery time of your new systems or products. Our dedicated engineers are ready to support you throughout your project, from concept, validation to production and aftersales. With our vast experience in project and product management, we can provide tailored services to meet your unique needs.
Our listed OEM products are categorised and shown below, more customised solutions are also available for specialised products and projects.
We are available to assist you if you inform us about your application and arrange a video call, visit, demo product or demo at your chosen location.
Alicat OEM Basis mass flow controllers offer fast, accurate and repeatable mass flow control for OEM gas applications where a cheaper mass flow controller maybe required.
Instruments are available with selectable gases which include Air, Ar, CO2, N2, O2, N2O. Stand-alone gases for use with one gas only are also available for use with He or H2 applications.
The Basis is available with full scale flow rates to 100 SCCM, 1000 SCCM (1 SLPM), 20 SLPM or 50 SLPM. Talk to us if you have specific full scale flow requirements.
They feature Modbus RTU over RS-232 or RS-485 as well as a stand 0–5 VDC analog input / output signal, all through a DB9 male connection.
For expert assistance with your application contact us:
Call us
01953 609930
Email us
sales@pctflow.com
The EP, EPC and EPCD pressure controllers by Alicat Scientific are ideal for OEM pressure applications whereby pressure needs to be sensed or controlled.
EP series of OEM pressure devices allows for a fast, reliable and repeatable pressure sensor offering a less than one second warm-up time and 30 ms response time.
EPC series of pressure controllers offer single valve pressure control to maintain precise control in your OEM application.
EPCD series of OEM controllers offer a dual valve configuration for precise OEM pressure control within closed or dead-ended systems.
All pressure controllers are available with both abolute of gauge pressure sensors.
Gauge full scale ranges include PSIG: 1, 5, 15, 30, 100, 300, 500, 1000, 1500 or 3000. Also available with 10 or 20 in H20.
Absolute full scale ranges include PSIA: 15, 30, 100, 300, 500, 1000, 1500 or 3000.
Control ranges are up to 500 PSIA or PSIG.
EPC OEM pressure devices feature Modbus RTU over RS-232 or RS-485 as well as a stand 0–5 VDC analog input / output signal.
EPC is also available with an optional IP66/67 rating.
For expert assistance with your application contact us:
Call us
01953 609930
Email us
sales@pctflow.com
Our fluid management technologies team can conduct validation and testing work in our test lab, accelerating your time to market. Our solutions have been tried and tested by businesses worldwide and are trusted for it reliable performance.
We offer an incredible range of oem peristaltic pumps and other flow path components to meet the specific needs of your OEM application.
Longer Pumps have an extensive range of OEM pumps and pump heads. All pumps are peristaltic pumps for non-fluid contacting fluid transfer.
Peristaltic pumps are available with a variety of options dependent on the OEM application.
OEM pumps available include the pump drive only which are available as variable speed drives, fixed speed drives or with a brushless DC motor.
OEM pumps are also available with a pump + pump head configuration which will accept fixed tubing sizes, generally ideal for smaller bored tubing.
OEM pumps with fixed pump speeds with various control options including analogue set point input and digital communications.
Flow rates available are from 22 ml/min up to 2400 ml/min.
PCT understand the importance of test and validation with pumping applications, please discuss with us your pumping requirements so that we may arrange a sample or demo for you to test and validate.
For expert assistance with your application contact us:
Call us
01953 609930
Email us
sales@pctflow.com
Our extensive life science knowledge, coupled with our ability to provide process support and extensive material compatibility resources, sets us apart from the competition. We do not limit you to any specific brand or company, providing you with complete freedom of choice and minimizing potential supply issues in the future. We aim to ensure an uninterrupted supply chain in compliance with GMP and regulatory requirements. With no minimum order quantity, you are in complete control and can start validation work right away.
We strive to respond to your inquiries in under an hour, ensuring a timely and efficient service. We offer customised solutions for tubing, connectors, fittings, packaging, flow meters, bags, filters, and more. Our tubing assemblies are manufactured to the highest quality standards in ISO 7 cleanrooms and can be sterilized within the shortest lead time possible.
Our services guarantee fast lead times and no minimum order quantity, with the flexibility to use any brand or company.
For expert assistance with your application contact us:
Call us
01953 609930
Email us
sales@pctflow.com
King Instruments pride themselves on producing the finest group of rotameters ever sold. Part of that grouping is being able to accommodate the low cost high volume market.
Their range of acrylic tube rotameters can be used with both liquid and gas processes. Whilst the design of the rotameter is fixed there are many options available around creating custom scales or dual scaled models when multiple fluids are used or process conditions change. Further customisation exists around how the meter is branded with unmarked or non-branded versions available as well as customised rotameters which feature an OEMs own logo and part number.
For high volume requirements specific port configurations, piping requirements as well as customised process connection threads can be considered.
Process connection materials of construction as standard are either PVC, brass of 316L stainless steel. O-ring materials available are EPR, Buna-N or Viton. These materials are also fully configurable for high volume requirements.
King offer the 7510 and 7511 series which are in-line rotameters for flow indication requirements. The King 7520 and 7530 series feature rear connections with optional control valve (in either brass or 316L stainless steel) for flow indications requirements which may also require manual flow control. Kings broader range of flow meters feature models which have 316L stainless steel, glass (Borosilicate) or polysulfone metering tubes for applications where acrylic metering tubes may not be suitable.
For expert assistance with your application contact us:
Call us
01953 609930
Email us
sales@pctflow.com
CS instruments FA 505 dew point sensor has been designed specifically for OEM applications. It features a small and compact design which is ideally suited to compact machines and drying systems.
CS Instruments own sensor design means that it is insensitive to condensation whilst offering fast response times and long term sensor stability.
For expert assistance with your application contact us:
Call us
01953 609930
Email us
sales@pctflow.com
