PCT

Premier Control Technologies

Flow, pressure, level and temperature solutions

01953 609930

November 2018

PCT Add Calibration Capability for Alicat Instruments

Premier Control Technologies has gained the status of Alicat Approved Calibration Centre.

Whilst annual calibration is not a pre-requisite, it is possible that your QA System might require Certified Annual Recalibration in which case this information is merely intended as a reminder. Equally, you may wish to consider an annual “health check” of your device.

Remember, all Alicat instruments are covered by an initial Three Year Warranty further enhanced by the Limited Lifetime Warranty. For further details please see www.alicat.com/knowledge-base/alicat-limited-lifetime-warranty/

The PCT service centre is Alicat Approved and is available to provide you with a 5 day turn around on all your Alicat mass flow unit standard accuracy calibrations ±(0.8% of reading + 0.2% of full scale) with full scale range 50SCCM to 100SLPM. Urgent 24hr turnaround calibrations are also available through our Expedite Service.

Full scale ranges outside of the above limits, High Accuracy Calibrations (±0.4% of reading + 0.2% of full scale), pressure and liquid calibrations can be performed within the Alicat Global Network and PCT are delighted to be your interface with that service.

If you would like to book an instrument in for re-calibration, arrange a quote for future work or simply want to discuss things further, then contact us today.