3 years after the launch of PCT’s Alicat-Approved Service Centre, we are again expanding our capabilities as we move to our new site at Hethel Engineering Centre.
Premier Control Technologies are now able to offer calibrations of full scale flows between 10 SCCM and 100 SLPM, with this increasing to 500 SLPM in the coming months! Cleaning, repairs, and reconfigurations are all available too on the same rapid 5-day turn around that our customers have come to rely on.
Full Scale ranges outside of the above limits, High Accuracy adder codes, pressure and liquid calibrations continue be performed via the Alicat Global Service Centre Network, and PCT remain delighted to retain their priority interface with that service.
No problem, send it into PCT for an ultrasonic clean and recalibration.
No worries, send it into PCT for a free inspection and repair quote.
No trouble, send it into PCT for a 24hr expedited reconfiguration service.
Remember, whilst PCT are an Alicat Authorised Service Centre, we are still able to recalibrate your Cole Parmer MasterFlex, or Omega FMA series devices. PCT are also perfectly placed to facilitate your Bronkhorst, Aalborg, Sierra and other recalibration requirements through our extensive calibration network.
Our aim is to operate as an extension to your own QA department by working in partnership to help with pro-actively managing your “fleet” of devices with annual calibration or periodic inspection. Equally, should an unfortunate event happen we can ensure your Alicat device is back in your hand, repaired, calibrated and ready in the fastest time possible.
If you would like to book an instrument in for service, need a quote for future work , or just want to discuss your options, then contact us today at firstname.lastname@example.org, or +44 (0)1953 303503
Further details can also be found on our Alicat Calibration Service page.