CODA Coriolis Standard Accuracy Flow Meter

We aim to respond within 1 hour

Priced from £1700
Standard accuracy Coriolis offers ±0.6% of reading and repeatability to ±0.1% of reading.
Insensitivity to external vibration.

Coda Coriolis flow meters are also available in standard accuracy form, offering excellent liquid accuracy calibration which is NIST-traceable to ±0.6% of reading or ±0.2% of full scale (whichever is greater). When used with gases the NIST-traceable calibration is to ±1% of reading or ±0.2% of full scale again whichever is greater.

Coda KMO standard accuracy devices are designed for use across industry where reliable high accuracy flow measurement is required for both liquids and gases. Coriolis flow measurement technology offers composition independence if your process is variable and fluid composition is unknown or changing. (Read about The Operating Principle of Coriolis flow meters here).

All Coda Coriolis meters and controllers have been designed to be inherently resistant to external vibrations, eliminating difficult environmental and process conditions.

Coda flow meters are available to measure down to as little as 0.4 grams per hour.

Four flow body options are available with typical full scale flow rates of 40, 1000, 10 000 or 100 000 grams per hour. The flow measurement range of a full scale device of 1% to 100%, with repeatability being ±0.1% of full scale.

HOW TO VIDEO: Set up and connect your CODA meter to FlowVision 2.0

Fill out the Configurator Form so our engineers can craft the perfect custom solution for you:

Configure now

Other features

Density accuracy: ± 5 kg/m3
Zero stability: ± 0.2% of full scale
Typical measurement response time: <100ms
Nominal Pressure Drop: 15 psi
Viscosity Range: 0 – 200 cp
Wetted Materials: 316L or Hastelloy C22
Density range of 0.1–2 g/cc (independent of mass flow measurement)
Dual analogue output for both flow rate and density
Tare button on top of the device
5 - 30 VDC power supply requirements @ 1.4 Watts
Dimensions: 70mm x 30mm x 100mm (L x W x H)
Optional 3.5" Touch Display
Communication protocols: Analog, Modbus RTU, EtherCAT, EtherNet/IP
Wetted materials, standard: 316L stainless steel and FKM. Optional: FFKM, EPDM, PCTFE, 316L stainless steel metal seals; nickel alloy
Ingress protection IP40 or optional IP67
Operating temperature: –35 to 70°C (fluid); 0 to 60°C (ambient); consult Alicat for additional options
Proof pressure: 1500 PSIA most units; 200 PSIA for 40 g/h units; optional 4000 PSIA for ≥100 g/h
Access to FlowVision 2.0, Alicat's Graphical User interface (GUI)