Premier Control Technologies Logo
Premier Control Technologies Flow, pressure, level and temperature solutions

Rheonik RHM 160 Large Coriolis Flow Meter

  • Measures up to 30000kg/min of flow.
  • Pressure ratings of up to 50 bar.
  • Accurate measurement at 0.15% uncertainty.

Flow rate

The RHM160 is designed for large flow applications being able to measure flow up to 30000kg/min and a minimum flow of 750kg/min.

Temperature and pressure ranges

Thick corrosive pipes mean that the RHM160 can be used for a range of applications including terminal transfer and cargo loading. A wide fluid temperature range of -196°C to 120°C

Accuracy

Precise measurements are given as the mass flow uncertainty is low at 0.15%. Measurements are consistent with repeatability being lower than 0.05%.

A long-lasting sensor life is guaranteed thanks to low mechanical stress on the sensor. The torsion oscillator design also has no moving parts to wear and fail meaning a durable meter.

Materials

The sensor enclosure is manufactured out of stainless steel as standard but can be made from 316 stainless steel. The terminal box can also be made from 316 stainless steel but comes as epoxy coated aluminium as standard.

The standard enclosure is protection class IP65 but can be upgraded to IP66/NEMA4X.

Wetted materials used in construction are 316Ti and Alloy C22.

Approvals

Approvals have been given for use in zone 0, 1, 2 and there are North American approvals for class I, Div.1 and Groups ABCD.

Specifications

  • Maximum flow of 30000kg/min with a minimum accurate flow rate of 750kg/min.
  • Pressure rating up to 50 bar and a fluid temperature range of -196°C to 120°C.
  • 0.15% mass flow uncertainty and a density uncertainty of 0.0025kg/l. Repeatability is better than 0.05%.
  • Wetted materials used are Alloy C22 and 316Ti.
  • Stainless steel enclosure and epoxy coated aluminium terminal box as standard. Option for both to be made from 316 stainless steel.
  • IP65 protection class enclosure as standard. IP66/NEMA4X available as an option.
  • Approved by ATEX/IECEx for use in zone 0, 1 and 2. Approved for use on marine vessels by the American Bureau of shipping. North American Approvals in Class I, Div.1 and Groups ABCD.
  • All sensors come calibrated with a calibration certificate and are hydro tested.

Product enquiry

Please fill out the form below and one of our sales representatives will contact you promptly.

Related products

Manufacturer

Rheonik
TOP