Rheonik RHM 60 Large Coriolis Flow Meter

Flow rate

The RHM60 is a large size Coriolis sensor with a maximum density rate of 3000kg/min and a minimum accurate density rate of 60kg/min.

Accuracy

The torsion oscillator design provides accurate measurements with low mass flow uncertainty at 0.1% and high consistency with repeatability being better that 0.05%.

Temperature and pressure ranges

Wide fluid temperature range of between -196°C and 350°C means it can be used in high temperature applications like asphalt and bitumen. Other applications include terminal transfer, reactor charging and plant balance.

Materials

The sensor enclosure is produced as standard out of stainless steel but can be changed to 316 stainless steel. The terminal box is made from epoxy coated aluminium but can also be made from 316 stainless steel.

A variety of wetted materials are available including Alloy C22, Superduplex and 316Ti.

Approvals

The sensor enclosure is protection class IP65 but there is the available option of IP66/NEMA4X. The sensors are approved for use in hazardous zones having been given ATEX/IECEx approval for zones 0, 1 and 2. There is also North American Approval for Class I, Div. 1 and groups ABCD.

Specifications

• Flow measuring range of 60-3000kg/min.
• High pressure rating of 490 bar.
• Fluid temperature range of between -190°C and 350°C
• Humidity limits of 5% to 95%
• 0.1% mass flow uncertainty with a density uncertainty of 0.0025kg/l. Repeatability is better than 0.05%.
• Available wetted materials are 316Ti, Alloy C22 and Superduplex.
• Stainless steel enclosure and epoxy coated aluminium terminal box. Both can be made from 316 stainless steel as an option.
• Enclosure is IP65 protection class as standard with the option of IP66/NEMA4X instead.
• Approved by ATEX/IECEx for use in zone 0, 1, 2 and by North American approvals for Class I, div.1 and groups ABCD. Approved for use on marine vessels by American Bureau of shipping.
• Sensors come hydro tested and calibrated with a calibration certificate.