Alicat CODA Coriolis Standard Accuracy Flow Controller

Alicat CODA Coriolis Standard Accuracy Flow Controller - Drawing

We aim to respond within 1 hour

Priced from £2528
Accuracy from ±0.6% (reading) or ±0.2% (full scale), whichever is greater
Typical indication response time from <100 ms (T98)

KCO series of Coriolis flow controllers from Alicat Scientific with a standard accuracy calibration are available in four main body sizes with typical full scale flow rates of 40, 1000, 10 000 or 100 000 grams per hour (g/h).

Accuracy for liquids with a standard accuracy calibration is NIST traceable to ±0.6% of reading or ±0.2% of full scale (whichever is greater). When used with gases the NIST-traceable calibration is to ±1% of reading or ±0.2% of full scale again whichever is greater. Repeatability is offered at ±0.1% of full scale with steady state control range available from 5% - 100% of the full scale range.

A typical control response time is less than 1,000 ms (T98), with typical indication response times of less than 100 ms (T98) for 40 g/h to 10,000 g/h controllers. This increases to less than 200 ms (T98) for 30,000 g/h to 100,000 g/h controllers.

All Coda Coriolis flow meters and controllers have been designed to be inherently resistant to external vibrations, eliminating difficult environmental and process conditions.

Video Demo of the CODA: Ultra-Low Flow

Alicat configure your device form banner

Need help?

If you need help completing the form, please feel free to contact the team directly

Other features

Available full scale ranges: 40 g/h to 100 kg/h
Steady state control range: 5% – 100% of full scale
Accuracy calibration, NIST-traceable (liquid): ±0.6% of reading or ±0.2% of full scale, whichever is greater, NIST-traceable (gas): ±1% of reading or ±0.2% of full scale, whichever is greater.
Repeatability: ±0.1% of full scale
Density accuracy: ± 5 kg/m3
Zero stability: ± 0.2% of full scale
Temperature Sensitivity: Mass flow zero shift: ±0.02% of full scale per °C from tare temperature. Mass flow span shift: ±0.01% of reading per °C from 25°C
Valve function is NC (normally closed)
Typical measurement response time: < 1 s
Operating temperature: –35 to 70°C (fluid); 0 to 60°C (ambient); consult for additional options
Proof pressure: 1500 PSIA most units; 200 PSIA for 40 g/h units; optional 4000 PSIA for ≥100 g/h
Communication protocols: Analog, Modbus RTU, EtherCAT or EtherNet/IP
Wetted materials: standard: 316L stainless steel and FKM. Optional: FFKM, EPDM, PCTFE, 316L stainless steel metal seals; nickel alloy
Ingress protection to IP40 or optional IP67
Access to Alicat's Graphical User Interface (GUI) FlowVision 2.0

Model numbers

KCO-40-5V-232
KCO-100-5V-232
KCO-300-5V-232
KCO-1K-5V-232
KCO-3K-5V-232
KCO-10K-5V-232
KCO-30K-5V-232
KCO-100K-5V-232

Industries

The Alicat CODA Coriolis Standard Accuracy Flow Controller is widely used in the following industries:

Alicat recalibration service

We provide a certified annual recalibration service on all Alicat mass flow meters and mass flow controllers. Further details on our recalibration service.

Manufacturer