Please fill out the form below and one of our sales representatives will contact you promptly.
We provide a full recalibration service on all Alicat Mass Flow Meters and Controllers.
For full details view our Calibration Service page.
Alicat MCR Series mass flow controllers allow you to control your gas via mass flow, volumetric flow or pressure with one single device. With the MCR series you can maintain speed and accuracy at flows from 50 Standard Litres per Minute up to 3000 SLPM. Every MCR series mass flow controller is repeatable and accurate with calibrations available up to +/- 0.4% of reading accuracy.
Each controllers features a 200:1 turndown ratio and offers a maximum line pressure rating of 145 PSIG.
The mass flow controller can be used as a standalone controller with the use of local display and push button keypad. The local display allows the user to see all flow data visible on one screen (mass flow, volumetric flow, absolute pressure, temperature) as well as control the flow or pressure of the gas. The display may also be upgraded to a colour TFT.
RS-232 communications are standard as well as an analogue output signal such as 4 – 20 mA and MCR series controllers can also offer Modbus-RTU, available over RS-232 or RS-485 and PROFIBUS protocols.
Every Alicat device is backed by the manufactures limited life time warranty and ships with a NIST traceable calibration certificate.
The Alicat mass flow controller or MCR series are also available with an Atex rating for use in ATEX Class 1 Zone 2 environments. Ex nA IIC, T4 Tamb. -40°C ≤ Ta ≤ +50°C
Please provide your details below