EGE Liquid Flow Sensor STK Series Probe
- Liquid flow probe for water or oils
- Available with a ¼” or ½” BSP connection
- Short threaded version
The EGE series STK is a liquid flow probe which operates on the thermodynamic principle available with a ¼” or ½” BSP connection with sensor lengths either 25mm or 31mm.
When used with water the STK series probe has a detection range of 1 to 150 centimetres per second (cm/s), when used with oils this is 3 to 300 cm/s.
EGE STK series probes have a typical start up times from 2 to 15 seconds and a reaction time of 1 to 13 seconds. Maximum pressure ratings are up to 100 bar.
Dependant on model the STK series has an IP67 or IP68 ingress rating.
STK probes either have a 2 metre cable or M12 connector, wetted parts are all 316 stainless steel.
STK probes can be used with the SKM or SKZ series of amplifiers.
Applications
- Cooling water
- Cooling lubricants
- Metal processing (cooling on rolling mills)
- Pump run dry protection
- Filter monitoring
- Monitoring of process flows
- CIP/SIP processes
Model numbers
- EGE-STK 421KH-A4
- EGE-STK421K-A4
- EGE-STK421-KH-A4
- Have a product enquiry?
Product enquiry
Please fill out the form below and one of our sales representatives will contact you promptly.
Or contact us by phone or email:
01953 609930 sales@pctflow.com
