DM Series Turbine Flowmeter

Unrivaled performance in Turbine Flow Meters

The DM-Series turbine flowmeters are well suited for a wide range of applications. These include among others, monitoring of flow rates of gasoline and coolant or lubricants in automotive and aerospace engines, measuring injection of additives in the food and pharmaceutical industries, monitoring and measurement of high-purity water in the research and development area, volume measurement for consumption billing for example. The DM series turbines are suitable for liquids with various process connections available. Not sure if this turbine flow meter is your solution - ask us.

'Tried and Tested' against other Competivie Turbine Meters

We have written an article about the Trigas DM-16 Turbine which demonstrates a test of it's accuracy against another competitive turbine flowmeter, in the same price bracket using the same flow rate. This test is supplied by a major calibration laboratory. Calibrations were performed with DAkkS certified test benches according to the ISO 17025 norms. You can find the application article here - Accuracy of Turbine Flowmeters with Variable Viscosity Fluids. We're sure after reading you will be confident in the DM Flow Turbine.

Specifications for the DM Series Flow Turbine

Typical specifications of the DM Series turbine meter include:

Measurement range:

• 0.1 l/min through to 1700 l/min

Repeatability:

• ± 0,05% of reading

Linearity:

• ± 0,5% in standard range
• ± 0,1% with linearising electronics

Response time:

• < 3 ms

Calibration accuracy:

• ± 0,03% of reading, DAkkS/ISO 17025 available

Operating temperature range:

• -270°C to +160°C (special version up to 400°C)

Operating pressure:

• AN: up to 540 bar
• HS: up to 34 bar

ATEX available