PCT Z1 Series - Pressure Transmitters

PCT Z1 Series Pressure Transmitter with Threaded Connection Front View

PCT Z1 Series Pressure Transmitter with Threaded Connection Side View

For pressure and level applications
Flush mounted diaphragm
0.1% of adjusted span accuracy and fully temperature compensated

The PCT Z1 Series pressure transmitter has been designed for measuring pressure and level on applications that may require a flush diaphragm, such as viscous or sticky medias.
The flush mounted diaphragms are very robust and are available in a choice of connections such as 1/2” and 1” BSP or NPT.

The transmitters are accurate to 0.1% of adjusted span and fully temperature compensated. Measuring ranges for the Z1 series are from 0.1 Bar up to 60 Bar.

Z1 series pressure transmitters can easily be setup is via the front buttons and local display. The Z1 also has the ability to simulate the mA loop output without pressure being applied.

Z1 series are rated for use up to 100 °c and are have an IP66 protection class.

All wetted parts are 316 stainless steel and the electronics are housed in a 304 stainless steel enclosure.

The Z1 series of pressure transmitter is a loop powered device and requires a 12 – 40 VDC power supply.

Applications

Common process applications and industrial uses include:

Viscous or sticky fluids
Process applications

Other features

HART Protocol
Profibus-PA Protocol
Additional process connections which are available include weld-on nipple, PMC, Valmet, and Valcom connections
Intrinsically safe Atex certification optional
Vacuum pressure ranges