Premier Control Technologies Logo
Premier Control Technologies Fluid Solutions

Longer BT100-1F Dispensing Peristaltic Pump

  • Ideal for lab use
  • Dispensing volumes can be programmed directly to the pump head
  • Can drive multiple pump heads, up to 4 channels

The BT100-1F series of dispensing peristaltic pump from Longer pumps allows for a pre-determined volume for dispensing to be programmed via the local display and keypad. The dispensing volume can be programmed from 0.01 mL up to 9.99 litres.

A copy number can be programmed to the dispense programme to allow for the total number of times the dispensing program should run (1 to 9999, with 0 being an unlimited cycle). The user can then programme the pause time between each dispense (0.1s – 99.9 min) with a resolution of 0.1s. If required a back suction time can also be programmed with a 0s – 99.9s response, with a resolution of 0.1s.

Dependant on the pump head model selected the pump to allow full scale flow rates from as little as 2 ml / min up to 600 ml/min. When the DG series low flow multi-channel pump head is used the peristaltic pump can pump up to 4 channels simultaneously.

The BT100-1F dispensing peristaltic pump can operate at speeds of up to 100 RPM, with speed control resolution to 0.1 RPM.

The pump can also be controlled via external signals such as 0- 5 VDC, 0 – 10 VDC, 4 – 20 mA or 0 – 10 kHz. The RS485 communication protocol can also control the pump.

Pump direction as well as start/stop status can be output via the OC gate signal.

How to set the back suction of the BT100-1F peristaltic pump

Fill out the Configurator Form so our engineers can craft the perfect custom solution for you:

Configure now

Model numbers

  • BT100-1F
  • BT100-1F-B

Manufacturer

Longer Precision Pump