L100-1S-2 Multi-Channel Peristaltic Pump - Premier Control Technologies

L100-1S-2 Flow Rate Pump with Flip Pump Head

L100-1S-2 Flow Rate Pump with Low Pulse Pump Head

L100-1S-2 Flow Rate Pump with Low Flow Multi Channel Pump Head

L100-1S-2 Flow Rate Pump with Industrial Pump Head

L100-1S-2 Flow Rate Pump with Easy Load Pump Head

L100-1S-2 Flow Rate Pump with Multi Channel Pump Head

L100-1S-2 Flow Rate Pump with Standard Pump Head

Order online
We aim to respond within 1 hour

3 Year Warranty
UKCA Compliant
Excellent 10000:1 turndown ratio
Multiple setpoint input options
Lots of pump head options
Max channels: 8

The Longer Pumps model L100-1S-2 is a multi-channel peristaltic pump, ideal for controlling full scale flow rates from 0.01µL/min up to 500 ml / minute dependant on the pump head used.

The high 10000:1 turndown ratio of the pump allows for a 0.01 RPM resolution within the 0.01 – 10 RPM range and a resolution of 0.1 RPM within the 10 – 100 RPM range.

The local keypad allows for speed control of the pump (RPM only) or flow rate control. When in flow rate mode, the flow rate is displayed and the pump runs continuously at the desired flow rate.

The flow rate can be set within the range of 0.01µL/min up to 500 mL/min. Flow rate units are fully selectable between μL/min, ml/min or L/min.

Setpoint control modules are available and communication protocols as per the below.

There are a wide range of pump heads which are compatible with this model for low flow and medium flow rate applications. The DG series of pump head offers a multi-channel solution where required.

Useful 'How To' videos

How to calibrate the flow rate on the L100-1S peristaltic pump.

L100 1S Peristaltic Pump 0 5V External Control Demo.

Operating the L100-1S by external signal control.

How to load the DG-2 pump head.

STEP file downloads

L100-1S-2.STEP

Ordering online

Longer L100-1S-2 Flow Rate Pump

You can now order this flow rate pump on our ecommerce website. And if neccessary add compatible pump heads and tubing to your order.

From £645.00 +VAT

Order online

Pump head and tubing compatibility

Pump drive	Pump head	Tubing size #	Tubing Dimensions IDxWT (mm)	Flow rate (ml/min/channel) at 0.01 - 100 rpm (measured with water)
L100-1S-2	YZ1515x or YZII15 3 rollers	13	0.8 x 1.6	0.0006 - 6.3
		14	1.6 x 1.6	0.0025 - 25
		19	2.4 x 1.6	0.0042 - 41.66
		16	3.2 x 1.6	0.0077 - 77.7
		25	4.8 x 1.6	0.016 - 160
		17	6.4 x 1.6	0.026 - 260
		18	7.9 x 1.6	0.036 - 366
	YZ2515X or YZII25 3 rollers	15	4.8 x 2.4	0.016 - 160
	YZ2515X or YZII25 3 rollers	24	6.4 x 2.4	0.026 - 266
	YZII25 3 rollers	35	7.9 x 2.4	0.037 - 367
	YZII25 3 rollers	36	9.6 x 2.4	0.05 - 500
	FG15-13 3 rollers	13	0.8 x 1.6	0.0005 - 5.3
		14	1.6 x 1.6	0.003 - 30
		19	2.4 x 1.6	0.006 - 61.67
		16	3.2 x 1.6	0.011 - 106.67
		25	4.8 x 1.6	0.023 - 230
		17	6.4 x 1.6	0.036 - 360
		18	7.9 x 1.6	0.04 - 400
	FG25-13 3 rollers	15	4.8 x 2.4	0.022 - 223
	FG25-13 3 rollers	24	6.4 x 2.4	0.037 - 366
	DG15-24 2 channels, 4 rollers	16, 25, 17		0.0008 - 300
	DG15-28 2 channels, 8 rollers		Inner diameter (ID) 0.13 - 3.17 mm Wall thickness (WT): 0.8 - 1.0 mm Tubing with stops	0.0003 - 75
	DG-1, 2, 4, 6 or 8 (6) 1-8 channels with 6 rollers		Inner diameter (ID) 0.13 - 3.17 mm Wall thickness (WT): 0.8 - 1.0 mm Tubing with stops	0.0002 - 48
	DG-1, 2 or 4 (10) 1-4 channels with 10 rollers		Inner diameter (ID) 0.13 - 3.17 mm Wall thickness (WT): 0.8 - 1.0 mm Tubing with stops	0.00015 - 32
	DMD15-13-B 2*3 rollers offset for low pulsation flow	213, 214, 219, 216, 2*25		0.002 - 375

Fill out the Configurator Form so our engineers can craft the perfect custom solution for you:

Configure now

Other features

External pump speed control (set point input) available via 0-5 VDC, 0 – 10 VDC, 4 – 20 mA or 0 – 10 kHz input
RS485 (modbus) communications protocol
Start / stop control (switched signal), direction control (switched signal).
Keypad lock feature
Power supply AC100V-240V/25W, 50/60Hz
IP31 rating