PCT

Premier Control Technologies

Flow, pressure, level and temperature solutions

Longer TJP-3A Laboratorial Syringe Pump

tjp-3a.jpg tjp-3a_w0109-1b_programmable_functions.jpg
  • Separate controller and drive unit
  • Programmable functions

The TJP-3A controller model is paired with the W0109-1B drive model, for a single channel laboratorial syringe pump.

The TJP-3A controller allows for multiple programmable functions which include customisable and complex infusion / withdrawal process, such as stepped infusion, combination constant speed and ramped speed infusion, trigger dispense or periodic dispense.

The run programme on the controller also allows for more basic programmable parameters of dispensing volume, flow rate as well linear speed.

The stroke of the drive unit is 90mm, with a pusher advance per miscrostep of 0.165μm.

Drive units have a linear speed resolution of 7.94μm/min with a linear travel accuracy of ≤ ±0.5% when travel ≥30% of drive unit stroke. The Maximum linear force is > 90N.

The drive units can be used with syringe sizes of 1/2/5/10/20/30 or 60mL with flow rates from as little as 0.139 μL/min up to 52 mL/min.

Applications

  • Laboratorial

Other features

  • 2 output signals (OC gate signal) to indicate start/stop and direction.
  • Control signal input, falling edge or TTL signal to control Start/stop
  • RS485 communications interface
  • 30 - 260 VAC supply @ 10W

Model numbers

  • TJP-3A
  • W0109-1B
tjp-3a.jpg tjp-3a_w0109-1b_programmable_functions.jpg

Product enquiry

Please fill out the form below and one of our sales representatives will contact you promptly.

If you wish to discuss your requirements on the phone please call us on +44 (0)1953 609930 or email us at sales@pctflow.com

Related products