Status SEM1600F Signal Conditioner

We aim to respond within 1 hour

Dual or Single Universal Frequency Input(s) Plus Excitation
Frequency (0.01 to 65000) Hz or Counter (DC to 1000) Hz Modes
Current (Active or Passive), Voltage or Bipolar Voltage Output
Volt Free Contact Trip, Latched Trip or Pulse Output Actions
Powered (10 to 32) V AC / (10 to 48) V DC Supply

The SEM1600F is a signal conditioner which is suitable for all common process frequency and pulse sensors. It can accept frequency inputs in the range of 0.02 Hz up to 65 kHz.

The product has a built in capability to operate as a dual input which allows differential flow / count measurement with advanced maths functions. Or, as a single channel input, with an external reset contact. When operated in signal channel mode, the discrete input can be programmed to reset the total counter, batch counter or latched relay.
The input can also be programmed to control the total counter direction with a combination of count up /count down or halt modes available.

It can be powered either with a 10 – 32 VAC supply or 10 – 48 DC supply. Offering either active or passive mA outputs as well as voltage or Bi-Polar voltage outputs it is the perfect solution for a DIN Rail mountable frequency signal conditioner.

A volt free output contact is also provided which can be used as either a trip, latched trip, pulsed trip, high or low alarms.

Connecting your SEM 1600F to the free Status software via the USB configuration allows for setup of the outputs.