Longer Industrial Syringe Pump SP1-CX

We aim to respond within 1 hour

Syringe sizes from 25µl up to 25ml.
Accuracy of ≤1% on syringes over 1ml.
Precision to CV≤0.05% at full stroke.

The SP1-CX is an OEM syringe pump module commonly used in applications where precise liquid handling is needed such as sample preparation and IVD applications. Accuracy of better than 1% in syringes with a volume of greater than 1ml provides an ideal pump for laboratory use.

External controllers and computers can be used to adjust the pump as there are a range of communication interfaces such as RS232 and RS485.

Useful 'How To' videos

How to install the SP1 CX' Industrial Valve & Syringe Pump.

Firmware Update Utility of the MSP CX & SP CX Pump.

Other features

Main Spec

Accuracy：≤1.0 % (syringe ≥1 mL)
Precision：CV≤0.05% at full stroke (with syringe ≥ 500uL)
Wetted material：Borosilicate glass，PTFE，PFA，CTFE，ETFE，UHMW-PE
Dimension (L x W x H)：114mm x 65mm x 254mm
Weight：2.15 kg
Power supply：DC 24V，1.5A (peak)

Syringe and Drive

Syringe fitting：1/4″-28 thread
Syringe：50uL, 100uL, 250uL, 500uL, 1mL, 2.5mL, 5mL, 10mL, 25mL
Syringe material：Borosilicate glass，stainless steel plunger with PTFE coating, PTFE or UHMW-PE plunger tip
Resolution (standard mode)：6000 steps with 0.01mm in 1 step
Resolution (microstep mode)：48000 microsteps with 1.25um in 1 microstep
Travel：60mm
Time for full stroke：1.26s-1200s
Drive system：Ball screw drive with optical encoder

Valve & Valve Drive

Turn time：≤250ms between adjacent ports
Valve options：Standard: 3-port valve, optional: 3-port distribution valve, 4-port valve, T-valve, Y-block
Max pressure：0.68MPA
Fitting：1/4″-28 thread

Communication

Interface：RS485, RS232, CAN bus，external control input and output
Protocol：Data terminal，OEM protocol (serial) or CAN
Baud rate："RS485 or RS232: 9600bps or 38400bps
CAN bus: 100 KB, 125 KB 250 KB, 500 KB or 1MB"
Format：Data bit: 8; parity: none; stop bit: 1; half duplex (RS232/485)

Firmware

Topology group：Up to 15 pumps in one group, support group control and individually addressed
Upgrade firmware online："One Click" by customer through PC Utility
Homing algorithm：Plunger home position is identified by motor stall, which will reduce the dead volume of the system
Halt function：For better interactive control, "h " command is used to halt execution of the command string during plunger movement. To resume execution with "R" or "r" command
Microstep mode：Set microstep mode for smoother motion with 48000 microsteps per stroke, 1/8 microstepping or 1/16 microstepping
Programmable parameter：Programmable ramps, cut-off velocity, plunger speeds, backlash compensation, programmable work-flow command set , delays and loops, terminate moves, diagnostics, absolute and relative positions

Environmental

Operating temperature：Recommended: 15℃-40℃ ，use low temperature syringe for low temperature application
Operating humidity：＜80% RH, no condensation
Storage temperature： -20℃-65℃
Storage humidity：＜80% RH, no condensation