Premier Control Technologies Logo
Premier Control Technologies Fluid Solutions

FMI GPD Series

  • Bi-directional adjustable flow rate from 0 to maximum
  • Thermally protected, ball bearing gear motor
  • Multi-position mounting stand for wall or counter

The GPD Series is a pump drive module that has been designed for reliability without compromising accuracy of the flow rate. Ceramic and fluorocarbon are used as the standard wetted materials within the pump while the ball bearing gear motor is thermally protected and cooled by fans.

The smallest flow rate within the GPD series is 1 - 10 ml / min offering a minimum and maximum dispense per revolution of 0.003 and 0.025 ml/rev.

The largest flow rate within the GPD series is 25.6 - 512 ml / min offering a minimum and maximum dispense per revolution of 0.064 and 1.28 ml/rev.

Various models exist within these specifications, contact us with your requirements for suitable sizing.

GPD series features a heavy-duty gear box for use with compressed air which has the requirements of 14-16 CFM at 40 psig. The air inlet size is 1/8" (F) NPT.

A multi-position tilt stand is fitted onto the module to enable wall or counter mounting to fit any application. The pump runs at a maximum of 400 rpm and is infinitely adjustable between the maximum flow rate and zero in both directions.

Other features

  • Dimensons are 203 x 76 x 76mm
  • Weight is 4.05 KG
  • Fluid temperatures up to 176C

Model numbers

  • GPD
  • GPD-Q3CSC
  • GPD-Q3CTC
  • GPD-Q3CKC
  • GPD-Q2CTC
  • GPD-Q2SAN
  • GPD-Q2STY
  • GPD-Q2SSY
  • GPD-Q2SKY
  • GPD-Q2CSY
  • GPD-Q2CSC
  • GPD-Q2CKY
  • GPD-Q2CKC
  • GPD-Q1CTC
  • GPD-Q1SAN
  • GPD-Q1STY
  • GPD-Q1SSY
  • GPD-Q1SKY
  • GPD-Q1CSY
  • GPD-Q1CSC
  • GPD-Q1CKY
  • GPD-Q1CKC
  • GPD-Q0SSY
  • GPD-RH1CTC
  • GPD-RH1CKC
  • GPD-RH0CTC
  • GPD-RH0CKC
  • GPD-RH00SKY
  • GPD-RH00STY
  • GPD-RH00ZTC
  • GPD-RH00ZKC

Manufacturer

Fluid Metering