FENYX+™ Variable Dispense Pump - For High Flow Rates

We aim to respond within 1 hour

Dispensing range of between 250 μl/rev and 1150 μl/rev
Flow rate range between 0.25mL/min and 1322.5 mL/min
Building upon the proven technology behind the preceding FENYX® pump which specialises in lower dispensing applications

Introducing the FENYX+™ Variable Dispense Pump

We’re proud to present the FENYX+™ Variable Dispense Pump from Fluid Metering, the next evolution in precision fluid handling. Building on the success of its predecessor, this pump offers a wider flow range, more versatility, and next-level performance — all while maintaining simplicity in its fluidic architecture with just one moving part in the fluid path. With the increasing demands from the Life Science sector, the new FENYX+™ offers higher flow rates for high flow applications.

Dispensing and flow rates

Available Options	Dispense Volume Range (μl/rev)	Flow Rate Range (mL/min)
FENYX+™	250-1150 μl/rev	0.25-1322.5 mL/min

For lower flow rate and lower dispensing applications please visit the FENYX® pump product page.

Key Pump specifications

DIMENSIONS	9.5" Tall x 6.5" Wide
WETTED MATERIAL OPTIONS	Ceramic: Alumina Pump Housing: PVDF, ETFE
SEAL MATERIAL OPTIONS	PTFE, FKM, FFKM, Rulon AR, UHMW-PE
DISPENSE VOLUME	For > .25 -1.15 mL, Accuracy of ± 2%, Precision (CV) < 1%
PORT OPTIONS	7/16-20 UNF Threaded Ports, Compatible with Compression Nuts

Key Motor/Drive specifications

RATED CURRENT	Rotational: 4.2 amp Linear: 1.5 amp
MOTOR FRAME	Rotational: NEMA 23 (57mm) Linear: NEMA 14 (35mm)
STEP ANGLE	Rotational & Linear: 1.8º Full Step
MOTOR SPEED	Rotational: Up to 1150 rpm Linear: Up to 1750 rpm
MOTOR DIRECTION	Rotational: Clockwise Linear: Clockwise & Counterclockwise
OPERATING TEMPERATURE	0ºC TO +50ºC

FENYX® Testing Units Available for 90-Day Trial

OEMs interested in testing FENYX®'s capabilities for their new or existing applications can request a Development Kit. These kits include one test pump, tubing, adapters, and other accessories to get you running easily in any testing environment.