Premier Control Technologies Logo
Premier Control Technologies Fluid Solutions

Jordan Valve Mark 75MV Series Wafer Style Control Valve

  • More resistant to cavitation / flashing with straight through, wafer design.
  • Easy installation between flanges with wafer body
  • High flow rates

The Mark 75MV series is a wafer style sliding gate valve with incorporated motor. The motor accepts either a 4 – 20 mA or 0 – 10 VDC input signal to control the valve. The valve can be set to either direct or reverse action. ANSI Class IV shut off is also provided.

Available sizes

Mark 75MV is available in sizes from DN25 up to DN200 (1” up to 8”). Due to the wafer design the Mark 75MV is smaller and lighter than conventional globe style control valves.

A typical 4” globe valve would have a 353mm face to face dimension whereas this is greatly reduced with the Mark 74MV to just 52.3mm. This saves on space, weight and material costs.

Other features

  • Seat Materials: Jorcote/316SS (standard); Jorcote with 303SS (optional)
  • Body / Bonnet connection: 316SS / Carbon Steel
  • Turndown Ration Capability: 100:1
  • Shutoff: ANSI Class IV tightness


The Jordan Valve Mark 75MV Series Wafer Style Control Valve is widely used in the following industries:

Product enquiry

Please fill out the form below and one of our sales representatives will contact you promptly.


Richards Industrials