Premier Control Technologies Logo
Premier Control Technologies Flow, pressure, level and temperature solutions

Mark 33 Series Electric Motor Control Valve

Delivery icon

Express Delivery available, less than 1 week!

  • Boiler feedwater valve with an industrial grade motor in a die-cast magnesium housing.
  • Accurate and low turbulence operation given by the sliding gate seat.
  • Motor and gear train are immersed in oil for increased durability.

The Mark 33 series is a boiler feedwater control valve that uses a sliding gate seat which helps to minimise turbulence and gives a shorter stroke for a more accurate operation. Overlapping gate seats give a tight shutoff that is ANSI Class IV rated.

The valve motor is encased in die-cast magnesium and has been given a NEMA3 protection rating. An oil-immersed motor and gear train ensures a durable operating system.

A jorcote seat comes as standard or a chrome planted seat can be chosen as an option. The body is constructed with ductile iron, bronze, carbon steel and stainless steel. Both threaded and flanged end connections are available.

Motors have an ambient temperature range of between 4°C and 66°C and sizes are from ¼" up to 2”. A 24 VAC is required to power the valve with an optional transformer being available for 120VAC.

Key specifications

Sizes
  • MK33: 1/4" through 2" (DN8 through DN50)
  • MK331/332: 1-1/2" & 2" (DN40 & DN50)
End connections
  • Threaded
  • Flanged
Body materials
  • Ductile Iron
  • Bronze
  • Carbon Steel
  • Stainless Steel
Trim materials
  • 303SS for DI, BZ or CS body valves
  • 316SS for SS body valves
Seat materials
  • Jorcote on SST - Standard
  • Chrome plated SST - Optional
PackingSpring loaded Teflon (to 500°F/260°C); braided (above 500°F/260°C)
Servicesteam, water, air, oil, gas and chemicals
ShutoffANSI Class IV
Seat Interchangeability MK331/3321-1/2" with 2" (DN40 with DN50)
Power Requirements24 VAC, 50/60 Hz (optional transformer required for 120 VAC)
Command signalsProportional control (0-135ohms); on-off control; current command (4-12, 4-20, 12-20mA DC standard); voltage command 2-10 VDC
Operating time (approx)30 seconds
Ambient temperature limit for motors-40°F to 150°F

Full specifications and further information can be found by downloading the spec sheet here.

Model numbers

  • 33
  • 331
  • 332

Product enquiry

Please fill out the form below and one of our sales representatives will contact you promptly.

Manufacturer

Richards Industrials
TOP