The Mark 601 and 602 are designed for pressure regulation applications that require higher flows but not using a larger valve.
A wide set point range of between 20 and 160 psi (1.4 - 11 bar) allows for use in a variety of applications such as air, oil, gas and in food production.
Sliding gate seats help to prevent droop and reduce the wear that the gate seats experience in globe or plug designs. The straight through flow reduces turbulences on the seat which can reduce erosion and noise when operating.
Interchangeable seats help to ease maintenance of the regulator as well as the seats being self-cleaning. Seats are manufactured using Jorcote on SST and overlap during shut off to create an ANSI Class IV shut off.
The body materials that are used are ductile iron, bronze, carbon steel and stainless steel. As standard the diaphragm is constructed using stainless steel, Jorlon, Buna-N with Viton being an option.
1-½" and 2" sizes are available with a range of end connection being threaded, ANSI flanges (150#,300#) and DIN flanges (PN10/16, PN25/40).
|Sizes||1-1/2" & 2" (DN40 & DN50)|
|Body materials||Ductile Iron, Bronze, Carbon Steel (A216 WCB), Stainless Steel (A351/CF8M)|
|Seat materials||Jorcote on SST — Standard|
|Service||steam, water, gas, oil, air and chemicals|
|Shutoff||ANSI Class IV|
Full specifications and further information can be found by downloading the spec sheet here.
The Mark 601 and Mark 602 Series High Flow Pressure Regulator is widely used in the following industries:
Please provide your contact details below.
PCT are a leading UK distributor and your enquiry will be handled with the utmost professionalism. Please provide your details below.