Mark 695 Series Piloted Tank Blanketing Regulators

Sizes: DN40 – DN50
Diaphragm: Buna-N, Viton, EPDM
End Connection: ANSI Class 150/300 Integrally Flanged
Body Material: Carbon Steel, Stainless Steel

Fast ship options available
Max inlet pressure up to 10.3 bar
ANSI Class VI Shutoff

Mark 695 series from Jordan Valve is a piloted tank blanketing pressure regulator, this particular model for use with DN20 and DN25 (3/4” and 1”) line sizes. Larger models are also available for DN50 / 2" applications.

Mark 695 has a soft valve seat designed specifically for low pressure tank blanketing applications as it is able to provide accurate pressure control at very low pressures.

As the Mark 695 series is pilot operated it is able to respond very quickly to small changes in tank pressure, this is achieved by throttling open or closed to maintain the desired pressure set point.

Mark 695 series is available with a choice of four spring ranges which can provide accurate pressure regulation down to as little as 1.25 millibar or as much as 103 millibar, depending on application specification. Sensitivity is maximised due to the lightweight Teflon diaphragm material.

Damage to the pilot is prevented as a standard filter with dripwell is fitted to the 695 series