Mark 96 Series Sanitary Pressure Regulator

We aim to respond within 1 hour

Express delivery available, less than one week! (Some 3/4" - 1.5" models)
Best Accuracy (least droop -set point offset) in the industry
Clean-in-Place, Steam-in-Place – dome lock pin to allow CIP/SIP
No guiding surfaces in the fluid below the diaphragm in the wetted area. ASME BPE compliant

The Mark 96 series from Steriflow is a manual sanitary pressure regulator for low to high flow requirements.

Body materials and finish

Wetted materials are machined from 316L bar stock, resulting in no wetted parts being made from castings. No guiding surfaces in the fluid minimises particulate generation.

The mark 96 is available with a Jorlon diaphragm which offers a lifetime warranty, other diaphragm materials are also available dependant on process.

A manual CIP pin allows the user to lock the regulator in full open position during rinse/CIP/rinse cycle

Typical applications and uses

The Mark 96 is available as either an inline valve or angle style. The pressure reducing valve has a bolted body for purified water, clean utilities and media in the biopharmaceutical, pharmaceutical, food & beverage and consumer health & beauty industries including:

Clean steam, pressure reduction for SIP
Media prep: AWFI (ambient WFI) and buffer dilution
Bioreactor/fermenter process input control: AWFI, buffer, other additives
Separation input and output control: AWFI
Purification input and output control: AWFI, buffer
Clean utilities: USP PW, WFI, CIP, CCA, CCG
F & B and consumer H & B process: inputs, outputs, purified water and clean utilities

Features and benefits

Applications

Common process applications and industrial uses include:

Pressure control
SIP pressure reduction
Pressure control (Buffer)
Buffer dilution pump pressure PRV
POU pressure control (Buffer)
Pressure control (CIP)
Caustic dilution pump pressure PRV
POU pressure control (CIP)
Pressure control (CDAG)
Distribution line primary pressure regulation

Other features

Size: 3/4″ through 3″ (DN20 through DN80)
End Connections: ASME, DIN and ISO Tri-Clamp, Extended Tube Weld
Cv & Flow Characteristic: 1.5 – 23 Cv (1,3 – 19,8 Kv)
Max. Pressure/Temperature: Dependent upon construction
Setpoint Range: 3 psi (0,2 bar) to 135 psi (9,3 bar); dependent on size and construction
Wetted Material: ASME SA479 316L (UNS 31603) is standard. EN 10272:2000 GR 1.4435, AL-6XN®, Hastelloy C-22 and others are optional
Surface Finish: ASME BPE SF5, 20Ra (0,5µm) electropolish is standard, 8Ra (0,2µm) optional
Diaphragm Material: Jorlon FDA, USP Class VI; EPDM/Nylon, FDA only; 316L (selection is size and Cv dependent)
Soft Seat Option: Jorlon, PEEK, Teflon (All FDA and USP Class VI)